Kenwood KTC-V301E - Manual (Page 4)

4 | KTC-V301E
Installing the Antenna
• To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery.
• Make sure to ground the unit to a negative 12V DC power supply.
• After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working
properly.
• Thoroughly wipe away oil and other dirt from the installation surface. Please avoid installation on uneven
surfaces.
■ System connection
TV ANTENNA INPUT
TO MONITO R
Both the left and right cable connectors are
adhesive-backed.
TV antenna cable
(Accessory 3 and 4)
Monitor cable
(Accessory 6)
• Insert the connector with the
hook aligned until it clicks.
• Release the hook when
disconnecting the connector. Hook
TV tuner (KTC-V301E)
Control unit
To film antenna To film antenna
B64-4243-00_KTC-V301E.indb 4 B64-4243-00_KTC-V301E.indb 4 08.7.29 10:30:50 AM 08.7.29 10:30:50 AM