Kenwood KDC-3051R - Manual (Page 14)

14
2
1
Installing the unit
Connect the wiring harness to the unit. Other wiring
connection has been completed earlier. (page 13, 14)
Before attaching, make sure
the direction of the
escutcheon is correct. (Wider
hooks on the top side.)
Dashboard of your car
For KDC-3051RY/ KDC-3051GY
Bend the appropriate tabs
to hold the mounting sleeve
firmly in place.
Fuse (10 A)
Antenna terminal (JASO)
Blue/White
Brown
Blue
To the terminal that is grounded when either the telephone rings or
during conversation. (To connect the Kenwood navigation system,
consult your navigation manual.)
Car fuse box
Car fuse box
Battery
Ignition key switch
Red (Ignition wire)
Yellow (Battery wire)
Black (Ground wire)
To the metallic body or chassis of the car
White (+) / White/black (–) : To front speaker (left)
Gray (+) / Gray/black (–) : To front speaker (right)
Green (+) / Green/black (–) : To rear speaker (left)
Purple (+) / Purple/black (–) : To rear speaker (right)
(Motor antenna control wire)
(Power control wire)
(Mute control wire)
To the power control terminal when using the optional power amplifier.
To the antenna control terminal in the vehicle.
EN02-15_KDC-3051R[E]f.indd 14 EN02-15_KDC-3051R[E]f.indd 14 8/2/10 9:17:31 AM 8/2/10 9:17:31 AM