Camera control, Switching the view mode, Switching the view camera – Kenwood DNX9210BT User Manual
Page 34: Switching the view mode switching the view camera, Amera control
Advertising
66
66
67
When a CMOS-310/CMOS-300 (optional
accessory) is connected, the camera can be
controlled from this unit.
Switching the View Mode
Camera system can display 5 kinds of view
mode.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
View modes are switched each time you
touch the illustrated area.
Switching the View Camera
Swithing between the front view camera and
the rear view camera.
1
Press the <AUD> button for 1 second.
Camera view screen appears.
2
Touch illustrated area during Camera
view screen.
Switches between the front view camera
and rear view camera each time you
touch the illustrated area.
C
amera Control
Advertising