Kenwood DNX7250DAB - Manual (Page 76)

75
Return to the Top page
Bluetooth Control
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Making a call
1
Press the <TEL> button.
DNX5250BT
DNX525DAB
Hands Free screen appears.
NOTE
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 30 digits can be registered for each
phone number along with up to 127 characters
representing a name. (127 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
2
Select a dialing method.
See the following table for each method.
Call by entering a phone number
1
Touch [ ].
2 Enter a phone number with number keys.
3 Touch [ ].
Call using call records
1
Touch [ ], [ ], or [ ].
2 Select the phone number from the list.
3 Touch [ ].
Call using the phonebook
1
Touch [ ].
2 Select the name from the list.* 1 * 2
3 Select the number from the list.
4 Touch [ ].
Call using the preset number
1
Touch [Preset #] to start calling the
corresponding phone number.
2 Touch [ ].
Continued