Kenwood TK-7160E - Discontinued - Manual (Page 25)

19
FleetSync: ALPHANUMERIC 2-WAY PAGING FUNCTION
FleetSync is an Alphanumeric 2-way Paging Function and is a protocol owned by
KENWOOD Corporation. FleetSync enables a variety of paging functions on
your transceiver, some of which depend on dealer programming.
The TK-7162/ TK-8162 only has access to the PTT ID function of the FleetSync
feature.
Note: Your transceiver functions include either FleetSync or 5-tone Signaling {page 22}, but not both.
S
ELCALL
(S
ELECTIVE
C
ALLING
)
A Selcall is a voice call to a particular station or to a group of stations.
■ Transmitting (TK-7160/ TK-8160 Only)
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status to enter Selcall
mode.
3 Press the <B and C> keys to select the ID of the station you want to call,
or enter a station ID using a DTMF keypad.
• If Manual Input mode is enabled, you can enter digits by using a DTMF keypad.
To enter Manual Input mode, first press and hold the S or DTMF key.
4 Press the microphone PTT switch and begin your conversation.
■ Receiving
The calling station’s ID will appear (TK-7160/ TK-8160) and an alert tone will
sound when a Selcall is received.
To respond to the call, press the PTT switch and speak into the microphone.
■ Identification Codes
An ID code is a combination of a 3-digit Fleet number and a 4-digit ID
number. Each transceiver must have its own Fleet and ID number.
• Enter a Fleet number (100 ~ 349) to make a group call.
• Enter an ID number (1000 ~ 4999) to make an individual call in your fleet.
• Enter a Fleet number to make a call to all units in the selected fleet (Interfleet call).
• Enter an ID number to make a call to the selected ID in all fleets (Supervisor call).
• Select “ALL” Fleet and “ALL” ID to make a call to all units (Broadcast call).
Note: The ID range may be limited by programming.