Bluetooth setup, Bluetooth setting, Bluetooth setup 53 – Kenwood KDC-BT92SD User Manual
Page 27: Bluetooth
53
|
KDC-BT92SD
English
|
54
Bluetooth Setup
Bluetooth Setting
You can select following Bluetooth Setting items.
1
Enter Bluetooth mode
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”.
3
Select the Menu item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display
Overview
“SMS Inbox”
Display the received short message.
Refer to
“BT Settings”
“Pairing”
“Device Regist.” Register a Bluetooth device (pairing).
Refer to
“Phone
Selection”
Select a cell-phone or Bluetooth audio player
connection
Refer to
<Selecting the Bluetooth device You
.
“Audio Selection”
“SPCL DVC
Select”
Register a Bluetooth device (pairing).
Refer to
“Device Delete” Cancel registration of the Bluetooth device.
Refer to
<Deleting a Registered Bluetooth
“SMS”
“SMS
Download”
Download a short message.
Refer to
.
“SMS Reply”
Select a method to reply to the received SMS.
Refer to
.
“SMS Message” Create an original message.
Refer to
<Creating an original message>
“Detailed Setup”
Move to detailed item.
“PIN Code Edit” Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to
<Registering PIN Code> (page 56)
.
“Auto Answer” Answer a call automatically after lapse of the
preset time interval for automatic answer.
“OFF”/ “0s” – “8s” – “99s”
“Auto
Reconnect”
Automatically reconnects the selected
Bluetooth device when radio wave becomes
strong enough, even after it is disconnected.
“ON”/ “OFF”
✍
When this function is turned ON, the Bluetooth device
is reconnected if it has been disconnected by selecting
“Phone Selection”/ “Audio Selection”.
“Bluetooth HF/
Audio”
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
“Front”: Outputs audio from the front speakers.
“All”: Outputs audio from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”: Beep is heard.
“OFF”: Beep is canceled.
“BT F/W Update” Display the version of the firmware of this unit.
“Mic Gain”
Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to “+” increases the voice volume.
“1” – “20” – “30”
“NR Level”
Reduce the noises generated by surrounding
environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to “+” increases the noise
reduction.
“–1” – “0” – “+1”
“Echo Cancel
Level“
Adjust the level of echo cancellation. Setting to
“+” increases the echo cancel reduction.
“–1” – “0” – “+1”
( : Factory setting)
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit BT Settings mode
Press the [
] button.
4
MENU VOL
¢
Remarks
• “Auto Answer” (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
“OFF” : Does not answer the phone call automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• “BT F/W Update” (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/