Selecting operation, Traffic information (fm tuner only), Selecting operation traffic information – Kenwood DNX7210BT User Manual
Page 26: Traffic information (p.51), Search by program type (p.50)
50
50
51
Manual memory
You can store the current receiving station or
channel in memory.
1
Select a station or channel you wish
to store in memory.
NOTE
• For TV, touch center bottom area of the screen if
source control screen is not displayed.
2
Touch [P#] (#:1-6) in which you want
to store the station or channel for 2
seconds until a beep sounds.
Selecting Operation
Preset select
You can list and select memorized station or
channel.
Selecting from the multi function menu
1
Touch the desired number from P1
to P6.
The unit will tune to the selected station
or channel.
Selecting from the preset list
2
Touch illustrated area.
List Control screen appears.
3
Select a station or channel from the
list.
Search by program type
(FM tuner only)
You can tune to a station with a specific
program type when listening to FM.
1
Touch [
] in the control screen.
The multi function menu appears.
2
Touch [PTY] in the multi function
menu.
TUNER PTY Mode screen appears.
3
Select a program type from the list.
4
Touch [Search].
You can search a station of the selected
program type.
Traffic Information
(FM Tuner Only)
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System that includes the TI information.
1
Touch [
] in the control screen.
The multi function menu appears.
2
Touch [TI] in the multi function menu.
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.