Kenwood DNX5240BT - Manual (Page 78)

78 DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R
Audio Control
Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the control screen of any source
Touch any source button on the "Source Select"
screen.
2 Display the Audio Control menu
3 Select the Audio Control item
1
1 Switches to the selected Audio Control
screen.
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display Audio Control screen
Touch in the "Audio
Control Menu" screen (page 78).
2 Set the each item
2
4
4
3 3
1
5
6
1 Moves to the "Audio Control 2" screen.
2 Adjust the front/back and left/right volume
around the touched area.
3 Adjusts the right and left volume balance.
4 Adjusts the front and rear volume balance.
5 Turns the Loudness control function On or
Off.
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable Only when zone function is set to
Off. See <Zone Control> (page 80).
6 Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
7
8
9
7 Returns to the "Audio Control 1" screen.
8 Adjusts the subwoofer volume.
B64-4258-00_00.indb 78 B64-4258-00_00.indb 78 08.10.30 7:28:32 PM 08.10.30 7:28:32 PM