Kenwood NX-720GE - Manual (Page 9)

5
PROGRAMMABLE FUNCTIONS
The , , , , , S, A, <B, C>, and ■ keys can be programmed with the functions
listed below. Ask your dealer for details on these functions.
• None
• Autodial
• Autodial
Programming
• AUX A
• AUX B
• Broadcast 1
• Call 1 ~ 6
• CH/GID
Down
• CH/GID Recall
• CH/GID Up
• Channel Entry
• CW Message 2
• Digit 1 x Down 3
• Digit 10 x Down 3
• Digit 1 x Up 3
• Digit 10 x Up 3
• Direct CH/GID 1 ~ 5
• Display
Format
• Emergency 4
• External Speaker
• Fixed Volume
• Forced Search 1
• Function
• GPS Position Display
• Group ID/Channel Entry
• Group
5
• Group + Short Message 5
• Group + Status 5
• Home CH/GID
• Horn Alert
• Individual 5
• Individual + Short Message 5
• Individual + Status 5
• LCD Brightness
• Lone Worker
• Maintenance
• Monitor
6
• Monitor Momentary 6
• Operator Selectable Tone 3
• Priority-channel Select 7
• Public Address
• Receive Entry
2
• Scan
• Scan
Delete/Add
• Scrambler/ Encryption
• Scrambler/ Encryption Code
• Selcall
8
• Selcall + Short Message 8
• Selcall + Status 8
• Send the GPS data
• Short
Message
• Site Down 1
• Site Lock 1
• Site Up 1
• Squelch Level 3
• Squelch Off 3
• Squelch Off Momentary 3
• Stack
• Status
• Talk
Around 8
• Transfer 3
• Transceiver Password
• Volume Down
• Volume Up
• Zone Delete/Add
• Zone Down
• Zone Up
1 Available only for NXDN Trunking operation.
2 Available only for NXDN Conventional operation.
3 Available only for Analog Conventional operation.
4 Emergency can be programmed only on the key. When assigned, the dealer must
set the key assignment hold to “Enable” and second function as “Emergency”.
5 Available only for NXDN Conventional operation and NXDN Trunking operation.
6 Available only for Analog Conventional, Analog Trunking, and NXDN Conventional
operation.
7 Available only for Analog Conventional and NXDN Conventional operation.
8 Available only for Analog Conventional and Analog Trunking operation.