Kenwood TK-2360E - Manual (Page 27)


vOICE ANNOUNCEMENT
When turning on the transceiver power and when changing the
channel, an audio voice will announce the selected channel
and the channel’s Vox and scrambler settings .
QUIET TAlK (QT)/ DIGITAl QUIET TAlK (DQT)
your dealer may have programmed qt or dqt signaling on
your transceiver channels . a qt tone/ dqt code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
STUN CODE
This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled . the stun code is cancelled
when the transceiver receives a call with a revive code.
OPTIONAl SIGNAlING
your dealer may also program several types of optional
signaling for your transceiver channels .
5-tone Signaling:
5-tone Signaling opens the squelch only when
your transceiver receives a call containing matching 5 tones
{page 6} .
DTMF Signaling:
dtmF signaling opens the squelch only
when the transceiver receives a call containing a matching
dtmF code .
FleetSync Signaling:
refer to “selcall (selectiVe
calling)” on page 5 .