Kenwood KDC-317UR - Manual (Page 10)

8
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [AUDIO CTRL], then press the knob.
3 Turn the volume knob to make a selection (see the table below), then press
the knob.
Repeat step 3 until the desired item is selected or activated.
4 Press and hold to exit.
• To return to the previous hierarchy, press .
Default: XX
SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.
BASS LEVEL –8 to +8 (0):
Adjusts the level to memorize for each source. (Before making
an adjustment, select the source you want to adjust.)
MID LEVEL –8 to +8 (0):
TRE LEVEL –8 to +8 (0):
EQ PRO
BASS ADJUST BASS C FRQ 60/ 80/ 100/ 200: Selects the center frequency.
BASS LEVEL –8 to +8 (0): Adjusts the level.
BASS Q FCTR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
MID ADJUST MID C FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K: Selects the center frequency.
MID LEVEL –8 to +8 (0): Adjusts the level.
MID Q FCTR 0.75/ 1.00/ 1.25: Adjusts the quality factor.
TRE ADJUST TRE C FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center frequency.
TRE LEVEL –8 to +8 (0): Adjusts the level.
PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL: Selects
a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bass boost
level. ; OFF: Cancels.
LOUDNESS LOUD LV1/ LOUD LV2: Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ; OFF: Cancels.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
SUB-W SET ON: Turns on the subwoofer output. ; OFF: Cancels.
DETAIL SET
LPF SUB-W THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are
sent to the subwoofer.
SUB-W PHASE REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to be in
line with the speaker output for optimum performance. (Selectable only if a
setting other than [THROUGH] is selected for [LPF SUB-W].)
SUPREME SET ON: Creates realistic sound by interpolating the high-frequency components
that are lost in AAC/MP3/WMA audio compression. ; OFF: Cancels. (Selectable
only when playing back an AAC/MP3/WMA disc or a USB device, except
iPhone/iPod.)
VOL OFFSET
(Default: 0) –8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source you
want to adjust.)
• [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if
[SWITCH PRE] is set to [SUB-W]. (➜ 4)
• [SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is set
to [ON].
EN_KDC-4557U[E0E20]f.indd 8 EN_KDC-4557U[E0E20]f.indd 8 8/14/12 12:06:17 PM 8/14/12 12:06:17 PM