Kenwood KDC-W413UA - Manual (Page 21)

English | 21
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
P.CONT
ANT.CONT
MUTE
Connecting Wires to Terminals
Battery wire (Yellow)
Ignition wire (Red)
Wiring harness
(Accessory
1)
If no connections are made, do not
let the wire come out from the tab.
Power control/ Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
⁄
See next page.
FM/AM antenna input (JASO)
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
⁄
To connect the Kenwood navigation system,
consult your navigation manual.
USB connector
Rear output/ Sub Woofer output
To Kenwood disc changer/ External optional accessory
(KDC-W4544U/ W4644U only)
⁄
To connect these leads, refer to the relevant instruction manuals.
AUX input (Stereo)
Use the mini-plug cable which is stereo type
and does not have any resistance.
Front side
B64-4440-00_00_E_EFGD.indb 21 B64-4440-00_00_E_EFGD.indb 21 08.9.25 9:01:27 AM 08.9.25 9:01:27 AM