Kenwood KDC-261UR - Manual (Page 6)

4
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
6 Turn the volume knob to select [12H] or [24H], then press the knob.
7 Press and hold
to exit.
(or)
1 Press and hold DISP SCRL to enter clock adjustment mode directly while in
clock display screen.
2 Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
To return to the previous setting item or hierarchy, press .
Set the initial settings
1 Press SRC to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to make a selection (see the following table), then press
the knob.
4 Press and hold to exit.
To return to the previous setting item or hierarchy, press .
Default: XX
AUDIO CONTROL
SWITCH PREOUT (Except for KDC-100Q )
REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the
line out terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU (For KDC-361U / KDC-130Y )
ON: Both display and button illumination change to white color when entering
[FUNCTION]. ; OFF: Both display and button illumination remain as [COLOR
SELECT] color. ( 10)
TUNER SETTING
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band (FM1/ FM2/
FM3/ MW/ LW). ; MIX: Memorizes one station for each preset button, regardless of
the selected band.
3
Select the display language and cancel the
demonstration
When you turn on the power (or after you reset the unit), the
display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”
1 Turn the volume knob to select [ENG] (English) or
[RUS] (Russian), then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
2 Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF”
appears.
Set the clock
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the
knob.
3 Turn the volume knob to select [CLOCK ADJUST], then press
the knob.
4 Turn the volume knob to make the settings, then press the
knob.
Day Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press
the knob.
1
2
EN_KDC-361U[E]_001B_f.indd 4 EN_KDC-361U[E]_001B_f.indd 4 16/10/2013 11:35:07 AM 16/10/2013 11:35:07 AM