Troubleshooting, More information – Kenwood KMM-261 User Manual

Page 12

Advertising
background image

10

Data Size:

B6L (182 mm x 128 mm)

Book Size:

B6L (182 mm x 128 mm)

TROUBLESHOOTING

Symptom

Remedy

Sound cannot be heard.

• Adjust the volume to the optimum level.
• Check the cords and connections.

“PROTECT” appears and no

operations can be done.

Check to be sure the terminals of the speaker wires are

insulated properly, then reset the unit. If this does not
solve the problem, consult your nearest service center.

• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the

display is incorrect.

Clean the connectors. ( 2)

The unit does not work at all. Reset the unit. ( 3)
• Radio reception is poor.
• Static noise while listening to

the radio.

• Connect the antenna firmly.
• Pull the antenna out all the way.

“NA FILE” appears.

Make sure the media contains supported audio files. ( 10)

“READ ERROR” appears.

Copy the files and folders onto the USB device again. If this

does not solve the problem, reset the USB device or use
another USB device.

“NO DEVICE” appears.

• Connect a USB device, and change the source to USB again.
• SD card is not inserted properly. Insert an SD card, and

change the source to SD again.

“COPY PRO” appears.

A copy-protected file is played.

“NA DEVICE” appears.

• Connect a supported USB device, and check the connections.
• Insert a supported SD card properly.

“NO MUSIC” appears.

Connect a USB device or insert an SD card that contains

playable audio files.

“iPod ERROR” appears.

Reconnect the iPod. / Reset the iPod.

“READING” keeps flashing.

Do not use too many hierarchical levels or folders.

Elapsed playing time is not

correct.

This is caused by how the tracks are recorded.

Correct characters are not

displayed (e.g. album name).

This unit can only display uppercase letters, numbers,

and a limited number of symbols. Uppercase Cyrillic
letters can also be displayed if [RUSSIAN SET] is set to
[РУССКИЙ BКЛ]. ( 5)

MORE INFORMATION

General
Detailed information and notes about the
playable audio files are stated in an online
manual on the following web site:
www.kenwood.com/cs/ce/audiofile/

Playable files
• Playable audio file: MP3 (.mp3), WMA

(.wma), WAV (.wav), FLAC (.flac)

• Playable USB device file system: FAT12,

FAT16, FAT32

Even when audio files comply with the
standards listed above, playback may be
impossible depending on the types or
conditions of media or device.

About USB devices
• This unit can play MP3/WMA/WAV/FLAC files

stored on a USB mass storage class device.

• You cannot connect a USB device via a USB

hub.

• Connecting a cable whose total length is

longer than 5 m may result in abnormal
playback.

• This unit cannot recognize a USB device whose

rating is other than 5 V and exceeds 1 A.

About SD card
• This unit is capable of playback of SD/SDHC

memory cards complying with the SD or
SDHC standard:

SD card (≤2 GB), SDHC card (≤32 GB)
• A special adapter is required to use a

miniSD card, miniSDHC card, microSD card
or microSDHC card.

• The MultiMedia Card (MMC) cannot be used.
• Data recorded in the SD audio format

cannot be played back.

About KENWOOD Music Editor
Light and KENWOOD Music
Control
• This unit supports the PC application

KENWOOD Music Editor Light and Android™
application KENWOOD Music Control.

• When you play audio files with song data

added using the KENWOOD Music Editor
Light or KENWOOD Music Control, you can
search for audio files by Genres, Artists,
Albums, Playlists, and Songs.

• KENWOOD Music Editor Light and

KENWOOD Music Control are available on
the following web site:
www.kenwood.com/cs/ce/

About iPod/iPhone
Made for
- iPod touch (1st, 2nd, 3rd, 4th, and 5th

generation)

- iPod classic
- iPod nano (3rd, 4th, 5th, 6th, and 7th

generation)

- iPhone, iPhone 3G, 3GS, 4, 4S, 5
• For the latest compatible list and software

versions of iPhone/iPod, see: www.
kenwood.com/cs/ce/ipod

• To connect devices featuring Lightning

connector, both KCA-iP102 (optional
accessory) and Apple Lightning to 30-pin
Adapter (accessory of the iPod/iPhone) are
required.

Do not leave the Apple Lightning to 30-pin

Adapter inside the car to prevent damages
caused by the hot temperature.

• You cannot operate iPod if “KENWOOD” or

“ ” is displayed on iPod.

EN_KMM_361SD_001A_EN_f.indd 10

EN_KMM_361SD_001A_EN_f.indd 10

9/10/2013 12:05:45 PM

9/10/2013 12:05:45 PM

Advertising
This manual is related to the following products: