Kenwood NX-800E - Manual (Page 17)

9
Many functions on this transceiver are selected or configured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
m
enu
A
cceSS
1 Press the key programmed as Menu.
2 Press / to select a Menu item.
• If you are using a microphone keypad, you can enter a Menu number directly.
3 Press to set up the selected Menu item.
4 Press / to select your desired setting.
• For settings with more than  level, repeat steps 3 and 4.
5 Press to set the selected setting and exit Menu mode.
• Press at any time to return to the previous display.
• Press at any time to exit Menu mode.
m
enu
c
onFigurATion
Some transceiver keys may already be programmed with functions listed in the
Menu. Those functions can be accessed directly by pressing the key. All other
functions can still be accessed using the transceiver Menu. The following table
lists the available Menu items.
No. Menu Description
0 2-TONE 2-tone Mode
02 AUTO REPLY MSG Auto Reply Message ON/OFF
03 AUTO TELEPHONE Auto Telephone
04 AUTO DIAL Autodial Mode
05 AUTO DIAL PROG Autodial Programming Mode
06 AUX A AUX A ON/OFF
07 AUX B AUX B ON/OFF
08 BROADCAST Broadcast ON/OFF
09 CLOCK Clock ON/OFF
0 CLOCK ADJUST Clock Adjustment mode
 DIRECT CH SEL Direct CH/GID  ~ 5 Select
2 DISP FORMAT Display Format ON/OFF
3 FIXED VOLUME Fixed Volume
4 FORCED SEARCH Forced Search
MENU MODE