Tv basic operation – Kenwood DNX521VBT User Manual
Page 25
48
48
49
TV Basic Operation
Most functions can be controlled from the source control screen and TV screen.
NOTE
• Set the remote controller mode switch to TV mode before starting operation, see
• You can only operate TV with the optional accessory TV tuner connected.
For analog TV, KTC-V301E/V300E/V500E is necessary.
For digital TV, KTC-D500E or KTC-D600E is necessary.
• During playback, press the <MENU> button to display the source control screen.
1
2
2
3
3
4
1
Simple Control screen
List Control screen
5
5
1 Information display/Control switching area
Displays the following information.
• [TV1], [TV2] (analog TV only): Band display
• Preset # (analog TV only): Preset number
• Group (analog TV only): TV area group
• #ch: Channel display
Touching this area switches between the Simple Control and List Control screen.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see
3 Preset key (analog TV only)/Multi function menu
Recalls the memorized channel. When touched for 2 seconds, store the current receiving station or
channel in memory.
When switched, various functions can be performed by using keys in this area.
For details on the menu, see
4 Preset list (analog TV only)
Displays the list of preset channels.
5 Sub function menu
The following function can be performed by using keys in this area.
• Hide all keys: Touch [
].
• Switches the channel: Touch [
4] [¢].
• Switches the band: Touch [BAND].
TV screen
6
6
7
8
6 Switching channel area
Touch to switch the channel.
7 Switching band area (analog TV) / Menu display area (digital TV)
For analog TV tuner, touch to switch the band.
For digital TV tuner, touch to display the menu.
8 Key display area
Touch to display the last control screen.