Tv setup – Kenwood DNX521VBT User Manual
Page 29
56
56
57
5
Set each item as follows.
TV1 Area/TV2 Area
Sets the present TV1 or TV2 receiving area.
Touch [SET], and select the area and number.
This function is available only when
KTC-V301E/KTC-V300E optional accessory is
connected.
On Screen TV
Sets how to display the information of the TV.
Auto (Default):
Information appears for 5
seconds when updated.
OFF: Does not display any information.
Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
6
Touch [SET] of [Announcement Select]
in the DAB SETUP screen.
The Announcement Select screen
appears.
7
Touch each Announcement list and
set on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
TV Setup
You can set the TV signal receiving areas.
NOTE
• Each operation in this section can be started from
the Top Menu screen. For details, see
With The Top Menu Screen (P.16)
1
Touch [
] in the control screen.
Multi function menu appears.
2
Touch [SETUP] in the multi function
menu.
SETUP Menu screen appears.
3
Touch [Source].
Source SETUP Menu screen appears.
4
Touch [TV SETUP] in the list.
TV SETUP screen appears.