Kenwood BD-7000 - Manual (Page 49)

The following messages appear on the TV screen in case of an error during operation.
Error message Possible Error Suggested Solution
Cannot play. • The disc cannot be played back with
this Player.
• Check the disc, and load it correctly.
Incompatible disc. • If you load a disc which cannot be
played with this Player (i.e. a scratched
disc), or if you load a disc upside down,
this message will appear, and the disc
will automatically pop out.
• Occurs if the loaded disc cannot be
played because it is a non-standard disc
or scratched, etc.
• Remove the disc.
Cannot operate. • Occurs if an operation is incorrect. —
This USB memory is not formatted
properly. Please format the memory in
USB memory management. • Occurs if there is a formatting error.
• Occurs if the USB memory is not
formatted with FAT 32/16.
• Format the USB memory again.
• Format the USB memory with your
PC.
The Connected USB Memory cannot
be used. It should be compliant with
USB 2.0 • Occurs if USB memory not compliant
with USB 2.0 High Speed (480Mbit/s) is
used (i.e. USB 1.0/USB 1.1).
• Connect USB 2.0 High Speed
(480Mbit/s) compliant USB memory.
On-screen Error Messages
48
BD-7000_CD-ROM_en_r2.6.indd 48 BD-7000_CD-ROM_en_r2.6.indd 48 10/10/07 9:08 10/10/07 9:08