Kenwood KRF-V6300D-S - Manual (Page 17)

English
17
Connecting the antennas
The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
AM loop antenna AM loop antenna
Place the supplied loop antenna as far as possible from the
receiver, TV set, speaker cords and power cord. Adjust the
direction for best reception.
œ Attach to the stand.
∑ Push the lever.
é Insert the antenna cord.
® Release the lever.
† Place the antenna and adjust the direction.
FM indoor antenna FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable
signal reception we recommend using an outdoor antenna.
Disconnect the indoor antenna when you connect one outdoors.
œ Insert the antenna cord.
∑ Fix the antenna on the wall.
FM outdoor antenna FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna
into the room and connect it to the FM 75Ω terminal.
AM loop antenna
Use an antenna
adapter
(commercially
available)
FM indoor antenna
FM outdoor antenna
(commercially available)
AUDIO PRE OUT ANTENNA
FRONT
CENTER AUX
CD/DVD
SURROUND
SUB WOOFER
MONITOR OUT DVD/6CH IN VIDEO 2 IN
VIDEO 2 CD/DVD DVD/6CH
OPTICAL OPTICAL COAXIAL
SUB
WOOFER
SURROUND
BACK L/
MONO
SURROUND
BACK R
MD/TAPE MD/TAPE
FM 75
VIDEO2 VIDEO1 VIDEO1
HDMI
DIGITAL IN
+
‒
AM
GND
DVD/6CH IN PLAY IN REC OUT SPEAKER B SPEAKER A
FRONT SPEAKERS (6–16 )
R
RED WH
R L
R L R L R L R L
VIDEO
S–VIDEO
DVD/6CH
IN
VIDEO 2
IN VIDEO 1 IN
VIDEO 1 OUT
MONITOR
OUT
COMPONENT VIDEO
IN
DVD/6CH VIDEO 1 VIDEO 2 MON
FM 75
AM
GND
ANTENNA
B60-5772-00_00_EN.indd 17 B60-5772-00_00_EN.indd 17 08.7.24 1:29:24 PM 08.7.24 1:29:24 PM