Installation – Kenwood KSC-SW11 User Manual
Page 6
ENGLISH
6
English
Caution:
• When making a hole under a seat, inside the trunk, or somewhere else in the vehicle, check that there is nothing hazardous on
the opposite side such as a gasoline tank, brake pipe; or wiring harness, and be careful not to cause scratches or other damage.
• Install in a location that does not come in the way of driving, getting in or out of the vehicle and movement inside the ve-
hicle compartment.
• Fix the product firmly so that it will not be moved by vibrations or impacts during driving.
■ Fixing the subwoofer
Attach the fixtures A
4 to the speaker unit securely
using the machine screws
7. Be careful so that the
connected cords do not get in between the speaker
unit and fixtures A
4.
Attach the fixtures A
4 to the speaker unit securely
using the machine screws
7. Be careful so that the
connected cords do not get in between the speaker
unit and fixtures A
4.
Drill the pilot holes for ø 3.6 mm screws on the sheet
metal section of the vehicle , and attach the speaker
unit to the vehicle using the tapping screws
6.
Drill the pilot holes for ø 3.6 mm screws on the sheet
metal section of the vehicle , and attach the speaker
unit to the vehicle using the tapping screws
6.
Installation
Before fixing the speaker in its position, be sure to check the sound while it is connected preliminary.
■ Fixing the cord in place
Connect the 10-pin connector cord
2
and remote
control
1 to the speaker unit.
Fix the cords to the speaker unit with fixture B
5
and
fix in place with the machine screws
8.
The subwoofer can be fixed in two ways. Select the optimum attaching position of fixture A
4 according to the subwoofer
installation location.
Fix the cord so that it will not
protrude from the side of the
p
speaker unit.
2 10-pin connector cord
1 Remote control
8 Machine screw x 2
5 Fixture B
7 Machine screw x 4
7 Machine screw x 4
4 Fixture A x 2
4 Fixture A x 2
1
1
2
2
6 Tapping screw x 4
6 Tapping screw x 4
Drill four pilot holes for
ø 3.6 mm screws.
Drill four pilot holes for
ø 3.6 mm screws.
4
4 Fixture A
4
4 Fixture A
Prohibition!
Caution:
This por tion becomes
slightly hotter than other
portions because it func-
tions as the radiator of
the heat generated by
the amplifier.
Caution:
This por tion becomes
slightly hotter than other
portions because it func-
tions as the radiator of
the heat generated by
the amplifier.
Fixing method A
Fixing method B
B61-1376_1_EN_00_KSC-SW11.indd 6
B61-1376_1_EN_00_KSC-SW11.indd 6
12.11.30 10:33:00 AM
12.11.30 10:33:00 AM