Kenwood TK-2140E - Manual (Page 30)

26
Press any key or wait until the pre-programmed timer
expires to return to Normal Operation Mode.
■ Reviewing the Messages in the Queue Memory
1 Press the key programmed as Queue to enter
Queue Mode.
• Depending on how your dealer has set up your
transceiver, either the last received message or the
first received message is displayed along with the
message number.
2 Use the encoder to select the message you want
to view (if more than one message is stored in the
queue memory).
3 Press the Cs s s s s key to cycle through the message,
the caller’s ID, and the channel which received the
message. Press the t
t t t tB key to toggle between
the numeric display and the message display.
4 To erase the message, press and hold the Cs s s s s
key for more than 1 second.
■ Automatic Status Response
If you pre-select a status number and then leave the
transceiver in Status Mode, the transceiver will
automatically respond with that status number when
a request from the base station is received. (The
base station request function is optional.)
S
HORT
M
ESSAGES
F
EATURE
Received short messages (maximum of 48 characters)
are displayed the same as Status messages {page 25}.
“Q” (Queue) and the message number appear with the
message.