Kenwood KDC-BT32U - Manual (Page 10)

18
English English
19
CONTENTS
Switching between Two Connected
Cell-phones
1 Press to enter Bluetooth mode.
2 Press and hold .
■ ■ You cannot switch between the connected
cell-phones during downloading of the
Phone Book.
■ ■ Only the main cell-phone from which you
can make a call.
■ ■ Both the main and sub cell-phones can
receive an incoming call.
■ ■ If the other cell-phone receives an incoming
call while you are talking on the active
cell-phone, you must finish the current call
to answer the incoming call to the other
cell-phone.
■ ■ If the main cell-phone is disconnected when
it is taken out of the vehicle, the sub cell-
phone becomes the main cell-phone if it is
held connected. When the disconnected
cell-phone is brought back into the vehicle,
it is reconnected as the sub cell-phone.
Clearing the disconnection message
Press to “HF DISCONCT” disappears.
Downloading the Phone Book
To download automatically
If the cell-phone supports a phone book
synchronization function, the phone
book is downloaded automatically after
Bluetooth connection.
■ ■ Setting on the cell-phone may be required.
■ ■ Up to 1000 phone numbers can be
registered for each registered cell-phone.
■ ■ Up to 32 digits can be registered for each
phone number along with up to 20*
characters representing a name.
(* 20: Number of alphabetical characters.
Fewer characters can be input depending
on the type of characters.)
■ ■ If no phone book data is found in the unit
even after the compete display, your cell-
phone may not support a phone book data
automatic downloading function. In this
case, try downloading manually.
To download from the cell-phone manually
Use this procedure when your cell-phone
does not support the Phone Book Access
Property (PBAP).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select
[SETTINGS], then press to enter.
3 Turn the volume knob to select
[TRANSFER PB], then press to enter.
“DL PB ***” is displayed.
4 By operating the cell-phone, send the
phone book data to this unit
By operating the cell-phone, download the
phone book data to this unit.
5 When downloading is completed, press
the volume knob.
■ ■ The manually downloaded phone book
data can contain up to 400 phone numbers.
■ ■ When you switch between the connected
cell-phones, the manually downloaded
phone book data is deleted.
■ ■ To cancel downloading of the phone book
data, operate the cell-phone.
Listening to a Bluetooth Audio
PAR
iPod VOICE
Preparation : You need to register your audio player before using it with this unit. ( page 14 )
1 Press SRC to select “BT AUDIO”.
2 Press 4 / ¢ to selects a file.
■ ■ Bluetooth audio players that do not support
AVRCP (Audio/Video Remote Control Profile)
cannot be used with this unit. Operate from
the audio player.
■ ■ Some functions cannot be operated from
the Bluetooth audio player.
■ ■ Speakers from which audio is output
change depending on the Bluetooth setting
“BT HF/AUDIO”. The default is Front. (
page
21 )
Selecting Repeat Play
Press number button 4 (REP) repeatedly
to make a selection.
FILE REPEAT, REPEAT OFF
Selecting Random Play
Press number button 3 (ALL RDM)
repeatedly to make a selection.
RANDOM ON, RANDOM OFF
■ ■ Press to select file.
■ ■ Press and hold to fast-
forwards/fast-backwards.
Press to pause. Press again
to resume playback.