Kenwood TK-7185E - Manual (Page 10)

4
GETTING ACQUAINTED
F
ronT
p
Anel
q (Power) switch
Press to switch the transceiver ON. Press again to switch the transceiver OFF.
w Transmit/ Busy indicator
This LED lights red while transmitting and green while receiving a call.
e / keys
Press the / keys to adjust the volume level. increases the volume and
decreases it.
r / keys
Press the / keys to select your desired channel/ call address (voice calls)
or status (status calls).
t Microphone jack
Insert the microphone plug into this jack.
y , S, A, <B, C>, and ■ keys
Press to activate their programmable functions*.
u Speaker
Internal speaker.
i PTT (Push-to-Talk) switch
Press and hold this switch, then speak into the microphone to call a station.
* Programmable functions vary, depending on the transceiver operating mode. Refer to
Trunking Mode {page 7} or Conventional Mode {page 6} for applicable functions.