Audiovox GMRS4WM User Manual
Page 6
3) Set the channel selector to the desired channel.
4) To transmit, press the Push-To-Talk button.
Speak slowly and clearly in a normal voice, approximately 2-3 inches from the microphone. A
built-in modulation control circuit will automatically adjust the microphone input level. There’s
no need to speak loudly.
5) To receive, release the Push-To-Talk button.
CUTOUT INSTALLATION DIMENSIONS
MINIMUM CUTOUT DEPTH 4.00”
INDICATOR LIGHT STATUS
Each charging station in the GMRS4WM has an indicator light in the charger door. When a
handset is present, the status is indicated in the following manner:
- The light glows RED when the handset is being charged.
- The light glows GREEN when the batteries are fully charged and the charger is in trickle mode.
- The light flashes RED if there is an error, such as the battery cell is bad or the handset is not
making proper contact in the charger station. Remove and re-insert the handset. If the condition
persists, replace the batteries with four fresh cells.
CARE AND MAINTENANCE
Remove the batteries from the transceivers if they are not going to be used for long periods.
This will eliminate the possibility of chemicals leaking from the batteries and corroding the
transceivers.