Asus 850 ATX P4T - Manual (Page 32)

32 ASUS P4T User’s Manual
3. HARDWARE SETUP
Expansion Cards
3. H/W SETUP
IMPORTANT: If using PCI cards on shared slots, make sure that the drivers sup-
port “Share IRQ” or that the cards do not need IRQ assignments. Conflicts will arise
between the two PCI groups that will make the system unstable or cards inoperable.
3.7.4 Accelerated Graphics Port (AGP) Pro Slot
This motherboard provides an accelerated graphics port (AGP) pro slot to support a
new generation of AGP graphics cards with ultra-high memory bandwidth.
P4T Accelerated Graphics Port (AGP PRO)
TOP VIEW
Rib (inside slot) Rib
20-pin bay 28-pin bay
AGP Card without Retention Notch
P4T
®
CAUTION! The AGP Pro slot is shipped with a warning label over the 20-pin bay.
DO NOT remove this label and the safety tab underneath it if you will be using an
AGP card without a retention notch. Removing may cause the
card to shift and may cause damage to your card, slot, and moth-
erboard. Remove ONLY when you will be using an AGP Pro
card. Use a rigid tip, such as a pen tip, to dislodge and remove
the tab from the bay.
Removing the
t a b
Interrupt Request Table for this Motherboard
INT-A INT-B INT-C INT-D
PCI slot 1 — — shared —
PCI slot 2 shared — — —
PCI slot 3 — shared — —
PCI slot 4 — — shared —
PCI slot 5 — — — shared
AGP slot shared — — —
Onboard USB controller — — — shared
SMBus — shared — —