Alpine CDA-7990 - Manual (Page 44)

42
- EN
CD Player Operation
Controlling CD Changer
(Optional)
An optional 6-disc or 12-disc CD Changer may be connected to
the CDA-7990 if it is Ai-NET compatible. With a CD Changer
connected to the Ai-NET input of the CDA-7990, the CD Changer
will be controllable from the CDA-7990.
Using the KCA-400C (the Multi-Changer Switching device)
multiple changers can be controlled by the CDA-7990.
See the Multi-Changer Selection section on page 43 for selecting
the CD Changers.
1 Press the SOURCE button to activate the
CHANGER mode. The display shows the
“Changer”, disc number and track number.
2 Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
• The controls on the CDA-7990
for CD Changer operation are
operative only when a CD
Changer is connected.
• The “Changer” indicator
illuminates in the CD Changer
mode.
• The source indicator varies
depending on the connected
source.
• After selecting the desired disc,
you can operate in the same way
as for the CDA-7990 CD player.
For details, please see the CD
Operation section.
• If the function indicator lights in
red, the Disc Select buttons
become nonfunctional.
• Press the FUNC button to turn
the function indicator to green,
then, select the discs numbered
from 1 to 6.
BAND
FUNC
SOURCE
Disc Select buttons
1~6
Function indicator
D 2 T 0 2 1 1 0 '
Disc Number
Track Number
CD playback elapsed time
<Display example of CD changer mode>