The phottix odin receiver, Setting channels on the receiver, Connecting a flash to the odin receiver hot shoe – Phottix Odin for Sony User Manual
Page 12
12
The flash’ s assist lamp will illuminate to aid in
focusing when the camera shutter button is
half-pressed.
AF Assist Illuminator Functions cannot be set
on the Odin TCU. These functions need to be
set on the camera – consult your camera
manual for specific menu settings and instruc-
tions.
1. The Phottix Odin receiver has three group
settings.
2. Move the Group Selection Switch to A, B or C
to select a group for each receiver.
Using the AF Assist Illuminator
Function
Setting Groups on the receiver
1. The Phottix Odin receiver has 4 channels.
2. Move the Channel Selection Switch to 1, 2, 3,
or 4 to select a channel.
3. Ensure the Phottix Odin TCU and receivers
are set to the same channel.
Setting Channels on the receiver
1. Turn off the flash and the Phottix Odin
Receiver.
2. Slide the flash into the receiver’ s hot shoe
mount.
3. The flash’ s locking mechanism will click
when engaged, holding the flash in place.
4. Turn on the flash and the Phottix Odin
receiver.
Connecting a flash to the Odin
receiver hot shoe
The Phottix Odin Receiver