Teledex Nugget Series - Manual (Page 8)

8 www.teledex.com NUGGET SERIES USER GUIDE
Unpacking Your Telephone
This package should contain the following:
• Telephone base unit
• Handset
• Coiled handset cord
• Straight line cord
Optional items to be ordered separately:
• Wall mount adaptor bracket
• Short line cord for wall mounting
Installation
CAUTION INFORMATION
• Never install telephone or network wiring
during a lightning storm.
• Never install telephone or Ethernet jacks in
wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying
telephone and network lines.
CONNECTING THE HANDSET CORD
A 10 ft. modular handset coil cord is provided.
To install, simply plug one end of the coil cord
into the jack at the base of the handset and the
other end into the jack located on the end of the
telephone base marked Handset.
CONNECTING THE LINE CORD
A 15 ft. modular line cord is provided. To install,
simply plug one end of the cord into the modular
jack at the top end of the base unit and the other
end into the wall jack.
Features
1. FLASH Key: Generates a 600 ms (0.6
seconds) hook switch “tap” signal. Utilized
to access special features on PBX systems.
The Flash function is programmable at
100 ms to 1000Ms (default is 600 ms). This
button is located underneath the faceplate.
2. REDIAL Key: Redials the last-dialed
telephone number, up to 32 digits.
3. Data Port: Provides a convenient extension
of the telephone line in use for connecting
a device such as a modem, fax, or
answering machine.
Operation
VOLUME
HANDSET AND SPEAKER VOLUME CONTROL
The handset volume control increases the volume
of the handset.
When the handset is off-hook, press the volume
control keys to increase or decrease the volume.
The handset volume control is an 8-step
operation. All models are hearing aid compatible.
RINGER VOLUME CONTROL
The ringer volume control switch is on the bottom
side of the phone.
The setting is either Low or HI (High).
CALLING
PLACING A CALL
• Lift the handset.
• Dial out by using the numeric dial pad or by
pressing a speed dial location.
NUGGET SERIES