Teledex Y Series - Manual (Page 2)

Mandatory Regulations
The following sections describe the mandatory
regulations that govern the installation and
operation of the EXP212, EXP224, and EXP248.
LIST OF TERMS
Table 1 lists the terms used in this chapter.
Table 1 List of Terms
Term Expansion
CE Conformité Européenne
EEC European Economic Community
EN European Standards
FCC Federal Communications Commission
IEC International Electrotechnical
Commission
GENERAL REQUIREMENTS
The sections that follow outline the mandatory
regulations that govern the installation and
operation of the EXP212, EXP224, and EXP248.
You must adhere to these instructions so that
your system meets regulatory requirements.
Danger 1—When removing cards from a
chassis under power, some of the components
such as the DC converters may be extremely
hot. Handle by the card guides only.
Warning 1—This unit contains no user-
serviceable parts. Refer servicing to qualified
personnel.
Warning 2—To prevent accidental electrical
short circuits, align the card correctly between
the card guides before you insert it in the slot.
PREVENTION OF ACCESS
The EXP212, EXP224, and EXP248 must be
accessible only to authorized personnel. Install
this apparatus in a restricted access location
or similar environment to prevent unauthorized
access.
EMC COMPLIANCE
EMC compliance may require the use of ferrites,
shielded cables, or other special accessories.
Where required, these special accessories must
be installed as per the instructions.
REGULATIONS COMPLIANCE
SAFETY APPROVAL
The system complies with the Product Safety
Requirements identified in EN 60950, IEC 60950.
ELECTROMAGNETIC
The system complies with the FCC Part 15 Class
A, EN 55022, IEC 61000.
SURGE PROTECTION
The system complies with IEC 61000-4-5.
ROHS AND WEEE
The system complies with the RoHS and WEEE.
2 www.teledex.com Y SERIES EXP212, EXP224, AND EXP248 USER GUIDE