Holtkoetter 5220 - Manual (Page 2)

e-mail: [email protected]
www.holtkoetter.com
ASSEMBLY INSTRUCTIONS FOR
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Final assembly by Holtkötter in South Saint Paul, MN. Holtkötter ® and Holtkötter Leuchten ® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Install the Bulb and Glass Shade
Once the fixture is mounted to the outlet box, install the bulb.
1. For the 5220/1 (Small Ceiling Fixture): being careful not to touch the glass portion of the
bulb with bare hands, hold the 60-Watt Halopin bulb and push straight into the socket.
2. OR For the 5221/1 (Large Ceiling Fixture): being careful not to touch the glass portion
of the bulb with bare hands, put the 100-Watt halogen bulb into the socket. Hold the
bulb at the porcelain grip, push and turn the bayonet base bulb clockwise until it into
is seated in the socket.
3. Install the glass shade by screwing it onto the stem of the fixture.
Please make sure that the following parts are enclosed:
A. Fixture including crossbar strap
B. Glass shade
C. Allen Wrench
D. Bulb for 5220/1: max. 60 Watt Halopin, Frosted
Order Code: 9250*060-HPNFR
OR
E. Bulb for 5221/1: max. 100 Watt Bayonet Base Halogen
Order Code: 9250*100-DC/CL
Be sure to turn off the circuit breaker before installing this fixture. It is
recommended that this fixture be installed and hung by a licensed
electrician.
Mounting Instructions
1. Disconnect power to the outlet box prior to installation.
2. Loosen the set screw (G) located on the main stem of
the fixture to release the fixture from the inner stem and
crossbar strap assembly (F) with the allen wrench (C)
provided.
3. Mount the crossbar strap assembly (F) to the outlet box.
4. Connect the wires from the fixture with the wires in the
outlet box according to generally accepted electrical
standards.
5. Slip the fixture onto the crossbar strap assembly being
careful to align the groove of the inner stem (F) with the
location of the set screw (G) on the stem of the fixture.
Tighten the set-screw (G) to secure the fixture to the
crossbar strap assembly.
G
F
Diagram 1
A
C
Ceiling Fixtures
No. 5220 & No. 5221
D
B
Diagram 2
5220/1
E
B
Diagram 3
5221/1