Halogen desk lamp no. 8346, Assembly instructions for – Holtkoetter 8346 User Manual

Page 2

Advertising
background image

e-mail: [email protected]

www.holtkoetter.com

ASSEMBLY INSTRUCTIONS FOR

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter

®

and Holtkötter Leuchten

®

are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter

Step 1.

Loosen the set screw with the allen wrench (D). Then
unscrew the aluminum ring (B) from the lamp arm.
Remove one of the large washers (E).

Step 4.

Align the glass shield (C) with the small screw
extending from the bottom of the socket. Place the
small washer (G) and the small plastic nut (H) over
the screw and finger tighten.

Step 5.

Next, screw on the handle (F) and finger tighten.
DO NOT OVERTIGHTEN – THE GLASS SHIELD MAY
CRACK UNDER TOO MUCH PRESSURE.

Step 6.

Plug the lamp cord into the wall outlet. Your lamp is
now operational.

Step 2.

Slide the reflector (A) over the socket. Place the large
washer (E) that was removed back onto the socket.
Screw the aluminum ring (B) back onto the socket
until it is tight. Tighten the set screw on the aluminum
ring into place. DO NOT OVERTIGHTEN. MAKE SURE
THE REFLECTOR IS STILL LOOSE ENOUGH TO TURN.

Step 3.

Put the 100-Watt halogen bulb (I) into the
socket. Hold the bulb at the porcelain grip,
push it down slightly and turn it clockwise.
BE CAREFUL NOT TO TOUCH THE BULB ENVELOPE
WITH YOUR BARE HANDS.

Note of Caution: The recommended replacement bulbs for this fixture are 100 W
Osram Bayonet Base Halogen bulbs. Use of other brands of unknown quality may
cause a risk of overheating.

Halogen Desk Lamp

No. 8346

Please make sure that the following parts for your lamp are enclosed:

A. Reflector
B. Aluminum Ring (attached to lamp)
C. Glass Shield
D. Allen Wrench (packed inside bulb box)
E. Large Washer (2 each, already installed)
F. Handle with plastic protector
G. Small Plastic Washer (attached to reflector)
H. Small Plastic Nut (attached to reflector)
I.

Bayonet Base Halogen Bulb

J. Desk Lamp

Bulb and Reflector Installation

Set Screw

B

D

E

A

E

I

H

G

C

F

Bulb and Reflector Installation, continued

Advertising