AGFA 1815 Copier - Manual (Page 21)

1-1
1 Installation
Be sure to perform the following installation procedure prior to using this machine.
Unpacking
1 Remove all of the components to the machine from the box.
Cautions • Be sure to hold both the front and rear sides of the
machine when carrying it, as shown in the
illustration.
• Be sure not to pull the cassette out when holding
the front of the machine.
• Be sure that the original cover is closed whenever
transporting the machine.
• Do not attempt to carry the machine by holding
only the top portion. Doing so may result in you
dropping the machine and thereby damaging the
machine and/or its covers.
2 Remove the protective sheet (A) and the 2 pieces of
packing tape (B).
1 Toner Container 4 One-touch Key Sheet
2 Power Cord 5 Basic Operation Guide (this guide) and CD-ROMs
3 Main Body 6 Cleaning Cloth
3
2
1
6
5
4
(B) (A) (B)