Videotec HEB - Manual (Page 8)

EN - English - I
nstruc
tions manual
6
7 Maintaining and cleaning
7.1 Window and plastic cover
cleaning (PC)
We suggest to use neutral soap diluted with water
or specific products for lens cleaning applied with a
soft cloth.
g h Avoid ethyl alcohol, solvents, hydrogenated
hydrocarbide, strong acid and alkali. Such
products may irreparably damage the
surface.
8 Disposal of waste
materials
g n This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area of
the world.
Your product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
6.1.5 How to install the camera power
supply
This chapter describes how to install the heater kit
option in the housings that are not equipped with it.
There are two types of camera power supply
depending on requirements. One model has an input
voltage of 100-240Vac with an output voltage of
12Vdc (Fig. 06, page 6). The other has an input voltage
of 230Vac and an output voltage of 24Vac (Fig. 07,
page 6).
g h The optional power supply cannot be
mounted together with the optional
blower.
Fig. 06 IN 100-240Vac - OUT 12Vdc.
Fig. 07 IN 115/230Vac - OUT 24Vac.