MagTek IntelliCAT99875667 User Manual
Page 3
Advertising
<IntelliCAT>| <Installation User Support Document>
ICAT Utility on Win 7 32/64bit Operator transfer
ICAT Utility Examples transferring Operators from a 1.XX DB to 2.XX DB
Go to the ‘Transfer Users to New Database’ tab
Browse to the 1.8 Source (old Access database)
Browse to destination or new database (UDL file)
Click on Upgrade button once all buttons are Green
Noted below is a screenshot of a Local Install (No old Operator folder in use):
1.8 Source Name
1.X_MtAdmin.MDB
Source Path
\\share\branch1_backup\
1.X_MtAdmin.MDB
Destination File & Path
C:\Program Files\MagTek\IntelliCAT\IntelliCAT.UDL
Or
C:\Program Files
(x86)\MagTek\IntelliCAT\IntelliCAT64.UDL
Advertising