MagTek MAGTEK - Manual (Page 40)

MagTek Communications Protocol, Driver Reference Manual
34
MCPCFG Command Summary
The following shows a summary of all commands supported by MCPCFG.EXE:`
Command Description
Device Instance Management
mcpcfg a <name> <pname1>=<val1> [<pname2>=<val2> ...] Add device
mcpcfg aq <name> <pname1>=<val1> [<pname2>=<val2> ...] Add device (quiet)
mcpcfg r <name> Remove device
mcpcfg rq <name> Remove device (quiet)
mcpcfg l Display devices
mcpcfg s <name> <pname1>=<val1> [<pname2>=<val2> ...] Change settings
mcpcfg sq <name> <pname1>=<val1> [<pname2>=<val2> ...] Change settings (quiet)
mcpcfg p <name> Display device settings
Installer Support Commands
mcpcfg restart Stop (if started) and re-start MCP
drivers (NT only)
mcpcfg stop Stop (if started) MCP drivers (NT
only)
mcpcfg osver Determine OS version.
mcpcfg reboot Display the standard “Reboot
Needed” dialog box, re-boot if user
answers “Yes”
mcpcfg msg <message text> Display a message box; wait for
user to click OK.
mcpcfg wait <command line> Start a GUI-based Win32 process
and wait for it to terminate.