MagTek IntelliStripe65 99875339 - Manual (Page 18)

IntelliStripe 65, USB/RS-232 Insertion Reader
10
Front Flange
Two molded flanges toward the front of the chassis (Figure 2-1) connect the Reader by four
threaded studs, nuts, and washers. The International Bezel is used with the Front Flange.
Side Mounting Studs
There are four molded studs. Two are located on each side of the chassis. The North American
Bezel is used with side mounting studs. Optional threaded inserts can be inserted in both ends of
the studs and used with imperial screws, as indicated in Figure 2-1.
Side Mounting Holes
Four molded holes are available when studs are not provided. Holes are positioned in line with
the centerline of the stud with molded nut retaining features, as shown in Figure 2-1 and Figure
2-2.
Figure 2-1. Chassis Mounting Features