MagTek P-SERIES - Manual (Page 10)

P-Series Port Powered Insertion Reader
4
SPECIFICATIONS
The Specifications are listed in Table 1-2.
Table 1-2. Specifications:
OPERATING
Reference Standards ISO7810 and 7811; JIS B9561
Power Input From RS-232 Interface
Interface Signal RS-232E
Message Format ASCII (8 Data Bits, No Parity) 9600 Baud
Tracks (tracks 1-2 versions) Reads ISO Tk1 and Tk2 data locations
Track Card Speed 3 to 50 IPS (7,6 to 127 cm/sec)
MTBF Electronics: 125,000 hours
Head: 500,000 Insertion Cycles
ELECTRICAL
DTR Voltage (Input) +5 to +15 VDC
Transmit Data (TXD) +5 to -5 VDC
Receive Data (RXD) +15 to -15 VDC
Communication Transfer Rate: 9600 bps,
8 data bits, no parity, 1 stop bit
Current
Power on Peak 10 to 12 mA
Transmitting 8 to 11 mA typical (5 ms duration)
Quiescent 4 to 6 mA typical (continuous)
MECHANICAL
Dimensions: Without Bezel With Extended Arm Bezel
Length: 4.08" (103.6 mm) 4.82" (122.4 mm)
Width: 3.15" (80.0 mm) 3.54" (90.0 mm)
Height: 1.29" (32.8 mm) 1.81" (46.0 mm)
Weight: 3.8 oz (108g)
±20%
ENVIRONMENTAL
Temperature
Operating
Storage
Units shipped prior to November 1, 2003:
32
o
F to 131
o
F (0
o
C to 55
o
C)
Units shipped after November 1, 2003:
-4
o
F to 158
o
F (-20
o
C to 70
o
C)
-40
o
F to 176
o
F (-40
o
C to 80
o
C)
Humidity
Operating
Storage
10% to 90% noncondensing
10% to 90% noncondensing
Altitude
Operating
Storage
0-10,000 ft. (0-3048 m.)
0-50,000 ft. (0-15240 m.)