MagTek PORT POWERED - Manual (Page 14)

Port Powered Insertion Reader
8
MOUNTING
Figure 2-1 shows the dimensions for mounting when using a flat-faced MagTek Bezel.
Figure 2-2 shows the dimensions for mounting when using an extended MagTek Bezel. In these
configurations, the top view and the side view show the head mounted under the PCB with
connector J2 used. Note that for newer units (using PCB 21063619), the printed circuit board is
reduced in size from that shown, and the location of J4 is shifted.
The other head configurations are shown in Figure 1-1.
Note
For users who are interested in designing their own bezel, please
refer to the dimensions provided in Appendix A.
Figure 2-3 shows the board layout and indicates the cable connections for all head positions.