MagTek IntelliStripe 340 - Manual (Page 7)

1
SECTION 1. FEATURES AND SPECIFICATIONS
The IntelliStripe 340, Desktop Motorized Reader, can read the mag-stripe data from financial
cards and drivers licenses and is compatible with data format specifications: ISO (International
Standards Organization), AAMVA, (American Association of Motor Vehicle Administrators),
CDL (California Drivers License).
The Reader communicates with a Host via an RS-232 serial interface, and uses a proprietary
MCP protocol and command set, which has been developed by MagTek. Windows Drivers for
the MCP protocol are available and can support Win 95/98, NT, and Win 2000 operating
systems.
CONFIGURATION
Part numbers and descriptions for the basic configuration are as follows:
16050353
IntelliStripe 340, 3TK, C Bezel, RS232 Interface, Stripe Down, includes attached
I/O cable.
16051412
I/O Cable, 7-pin connector connects to host 9-pin connector with 12V/Ground
connector for Power Supply. (Supplied as part of 16050340 Assembly.)
64300080
Power Supply, 100V through 240V regulated with 2.5mm plug.
71100001
AC power cord, P/N is for use in North America. Other users must supply their
own cord, or contact MagTek for international cords.
STANDARD FEATURES
Standard features of the IntelliStripe 340 are as follows:
•
Motorized transport
•
RS232 interface
•
Status LED
•
Flash upgradable
•
Supports all popular magnetic stripe track combinations
•
Front Card Gate prevents coins, dust, moisture, and debris from entering the unit – gate
resists opening except when ISO-size card enters the unit.