MagTek USB HID INTELLIHEAD - Manual (Page 10)

USB HID IntelliHead Swipe Reader
2
HARDWARE CONFIGURATIONS
The hardware configurations are as shown in the table below. Drawings of each model are
included in Appendix A.
Part
Number
Description
Cable Length and
Connector Type
Rail or Housing
21030006 USB HID IntelliHead on spring 125mm, 5 pin Molex None
21030010 USB HID IntelliHead on spring
440mm, 5 pin Molex
(reverse pin out)
None
21030032 USB HID IntelliHead on spring
280mm, 5 pin Molex
(reverse pin out)
None
21030042 USB HID IntelliHead on beam 125mm, 5 pin Molex 4.05mm Beam Arm
21040124 USB HID IntelliHead Black 1.8m (6’), USB-A 100mm Black enclosure
21040128 USB HID IntelliHead Black 150mm (6”), USB-A 100mm Black enclosure
21044000 USB HID IntelliHead 43mm rail 125mm, 5 pin Molex 43mm Black rail
21045087 USB HID IntelliHead on rail 125mm, 5 pin Molex 90mm Black rail
21046003 USB HID IntelliHead 60mm Slim rail 125mm, 5 pin Molex 60mm Black slim rail
21047011 USB HID IntelliHead Slim rail
125mm, 5 pin Molex 90mm Black slim rail
21047022 USB HID IntelliHead Slim rail 125mm, 5 pin Molex
90mm Black slim rail; 2-
piece design
ACCESSORIES
The accessories are as follows:
Part Number Description
21042806 USB MSR Demo Program with Source Code (Disk)
21051534 Test Cable to convert from IntelliHead to USB-A (6 ft)
99510026 USB MSR Demo Program with Source Code (WEB)
REFERENCE DOCUMENTS
MagTek Magnetic Card Reader Design Kit Technical Specification (99821002)
MagTek USB KB IntelliHead for Swipe Readers, Technical Reference Manual (99875321)
Axelson, Jan. USB Complete, Everything You Need to Develop Custom USB Peripherals, 1999.
Lakeview Research, 2209 Winnebago St., Madison WI 53704, 396pp., http://www.lvr.com
USB Human Interface Device (HID) Class Specification Version 1.1
USB (Universal Serial Bus) Specification, Version 1.1, Copyright

1998 by Compaq Computer
Corporation, Intel Corporation, Microsoft Corporation, NEC Corporation
USB Implementers Forum, Inc., www.usb.org