MagTek MAG-WEDGE READER - Manual (Page 8)

Mag-Wedge Reader
2
Table 1-1. Part Numbers for Mag-Wedge Readers
IBM XT Uses Existing Keyboard Cable
Part Number
Description
21080005 XT Tks 1,2 with CR. No PinPad Interface
21080006 XT Track 2 with CR. No PinPad Interface
IBM AT Uses Existing Keyboard Cable*
Part Number
Description
21080020 AT Tracks 1,2 with CR
21080021 AT Track 2 with CR
21080012 Same as p/n 21080021 except no start and end sentinel output
21080022 AT Track 2,3 with CR
IBM PS/1, PS/2 Compatible - Uses Existing Keyboard Cable*. Cable has female mini din connector
-attaches directly to keyboard cable *
Part Number
Description
21080057 PS/2 Tracks 1,2 with CR
21080072 Same as p/n 21080057 except no start and end sentinel output
21080058 PS/2 Track 2 with CR
21080073 Same as p/n 21080058 except no start and end sentinel output
21080059 PS/2 Tracks 2,3 with CR
*PINPad used is Encrypting PINPad and Cable P/N 30015040.
For other configurations, check with the factory.
CR=Carriage Return
Table 1-2. Part Numbers for Mag-Wedge Readers for Older PS/2 Computers
IBM PS/2 Reader Cable Plugs into AMP Connector on PS/2 Keyboard 7' Coiled Cable*
Part Number
Description
21080050 PS/2 Track 1,2 with CR
IBM PS/2 Reader Cable Plugs into AMP connector on PS/2 Keyboard 10' Straight Cable*
Part Number
Description
21080061 PS/2 Track 2 with CR
*PINPad used is Encrypting PINPad and Cable P/N 30015040.
For other configurations, check with the factory.
CR=Carriage Return