MagTek iDynamo MagneSafe V5 - Manual (Page 37)

Section 2. Communications
31
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled to have these changes take effect.
Example Configure to use Card Data Encryption Variant – Data Encryption both ways:
Cmd Num Data Len Prp ID Data
01 06 54 01
Example Configure to use Card Data Encryption Variant – Data Encryption both ways Response
(Hex):
Result Code Data Len Data
00 00
Example Get Card Data Encryption Variant property:
Cmd Num Data Len Prp ID
00 01 54
Example Get Card Data Encryption Variant Response (Hex):
Result Code Data Len Data
00 01 01