MagTek BulleT - Manual (Page 7)

Development
SECTION 1. CONNECTING READER TO MOBILE DEVICE
1.
Pull up Applications or
Menu and select Settings
5.
On your Android
device select SCAN
FOR DEVICES.
2.
Select Wireless and
network
6.
Select the MAGTEK
DEVICE when it
appears on the
screen.
3.
Select Bluetooth settings
7.
The screen will
prompt you for a PIN
(the default is 1234).
4.
Turn on the BulleT reader;
a green light will flash
when the device is trying to
connect
At this point the device is
PAIRED BUT NOT
CONNECTED
to
QwickPAY.