Clary CMN2000IPA - Manual (Page 21)

Page 21
OPTIONS
This rackmountable UPS is supplied with a matching rackmountable auxiliary battery box. This battery
box is designed to host two strings of batteries, to extend battery support times. The additional time is
dependent on the unit capacity and load size.
The battery pack is rated at 96VDC and comes with a mating cable that directly connects to the battery
port at the rear of the UPS. This connector is exposed, after removing the attached cover plate. The
connector on the battery and UPS are the same so that the cable can be plugged in either way. The
connector used is a locking type, when fully engaged, will not allow the cable to be pulled apart, unless
the locking ears are depressed.
The battery box fits a 5 1/4” slot into a 19”wide rack. The full depth of the battery is 15”. It is slide ready
and weighs approximately 85 pounds. An additional port is available at the rear of the battery box to add
a second battery box, if necessary.