Legacy Classic Furniture Panel Bed Queen 2970-4105K - Manual (Page 2)

Page 2 of 2
place the slats near the head board and the foot board leaving no support in the center. After you have
measured the placement of the slats be sure to follow the directions to screw down the slats onto the
bed’s cleats. (These cleats are already attached to the bed’s side rails.)
Step 5: After completing all the steps above you can insert the box spring(s) and mattress.
For All beds:
Step 1: Hook side rails into slots on the headboard and the footboard. Please follow the instructions on the
other sheet.
Step 2: Attach center support legs onto slats
Step 3: Screw slats onto side rails. There are three slats, please distribute each space evenly.
Step 4: Adjust height of center support legs with screw adjustment.
slats
slats
slats
distribute each space evenly
slats
slats
distribute each space evenly
distribute each space evenly
distribute each space evenly distribute each space evenly
distribute each space evenly
distribute each space evenly
slats
distribute each space evenly
BED
RA
I L
BED POST
SLAT SUPPORTS
LEVELER
For Queen Bed For King Bed
Assembly is now complete.