Legacy Classic Furniture Nursery Stage 4 Bed Rails 2830-8930 - Manual (Page 2)

Assembly Instruction 2830-8900 CRIB MADISON
Page 2 of 6
NOT substitute parts.
 DO NOT use a water mattress with this crib.
 Replace teething rail if damaged, cracked or loose. NOTE: This is only for
cribs with teething rails.
 If refinishing, use a non-toxic finish specified for children’s products.
 Follow warnings on all products in a crib.
09-005
CAUTION : ANY MATTRESS USED IN
THIS CRIB MUST BE AT LEAST 27 ¼ in.
(69CM) BY 51 5/8 in. (131CM) WITH A
THICKNESS NOT EXCEEDING 6 in. (15
CM)
09-003
IMPORTANT SAFETY INSTRUCTIONS:
 Please carefully read all instructions and warnings before assembling the crib.
 Use only vendor’s supplied hardware to assemble. Using unauthorized hardware could jeopardize the
structural integrity of the item.
 For your safety and ease, assembly by two or more adults is recommended.
 Keep instructions for future use.
PARTS INCLUDED:
(A) Left Side Gate - 1 pc
(D) Crib Back Head Board – 1 pc
(B) Right Side Gate - 1 pc (C) Mattress Metal Base – 1 pc
(E) Front Gate Foot Board- 1 pc