Horner APG RCC HE-RCC972 - Manual (Page 2)

MAN0970-04-EN RCC972 Specifications / Installation
2 Panel
3
Ports / Connectors / Cables
4
Wiring
Analog RCC972
1 Analog In1
2 Analog In2
3 Analog In3
4 Analog In4
5 Analog In5
6 Analog In6
7 Analog In7
8 Analog In8
C 0V
1 Analog Out1
2 Analog Out2
3 Analog Out3
4 Analog Out4
0V 0V
CH CAN High
CL CAN Low
Pin MJ1 Pins
8 TXD OUT
7 RXD IN
6 0 V Ground
5
+5V
(60mA Max)
OUT
4 RTS OUT
3 CTS IN
2 N/C
1 N/C
8
1
Power Up: Connect to Earth Ground.
Apply 10 – 30 VDC.
Torque rating 4.5 - 7 Lb-In /(0.50 – 0.78 N-m)
Memory Slot:
Uses µSD Removable Memory for data logging, screen
captures, program loading and recipes.
Horner Part No.: HE-MC1
Serial Communications:
MJ1: (RS-232 ) Use for Cscape programming and
Application-Defined Communications.
116mm (4.567”)
111mm (4.370”)
35.84mm (1.411”)
Analog I/O Connector
Digital I/O & Power
Connector
Run/Idle Switch
Load Switch
Ethernet Port
RS232 Port
uSD Memory port
Ethernet Port:
The Ethernet port is a standard RJ45 port supporting:
Webserver, various Ethernet protocols and Cscape
programming. See:
http://heapg.com
Manual: SUP0740-07.pdf
Wire according to the type of inputs / outputs used.
Use Copper Conductors in Field Wiring Only, 60/75°C
Wiring Specifications
For I/O wiring (discrete), use the following wire type or equivalent: Belden 9918,
18 AWG (0.8 mm
2 ) or larger.
For shielded Analog I/O wiring, use the following wire type or equivalent: Belden
8441, 18 AWG (0.8 mm
2 ) or larger.
Note: The wiring examples show
Positive Logic input wiring.
Do not apply external Power to the Analog
inputs without a load.
CAN Port
For CAN wiring, use the following wire type or
equivalent: Belden 3084, 24 AWG (0.2 mm 2 ) or
larger.
__________________________________________________________________________________________________________________________________________________________________
6/20/2013
Page 2 of 4 ECN
No part of this publication may be reproduced without the prior agreement and written permission of Horner APG, Inc. Information in this document is subject to change without notice.