Acer X233HZ - Manual (Page 28)

28
Machine Disassembly
This chapter contains step-by-step procedures on how to disassemble the X233HZ&X243
HQ monitor for maintenance.
The tool for disassembly is as follows:
Screwdriver,Hexagonal screwdriver, Putty knife.
Disassembly Procedure
1. Remove the hinge assembly.
2. Remove the rear cover and bezel.
The arrows in blue are the hook that we should put attention to when remove the rear cover. Use plastic
putty knife to release hooks, then you can easily remove the rear cover.
Chapter 3
http://www.wjel.net