LBL Lighting MEZZO GP - Manual

1
Install the Mounting Plate
Remove the mounting plate from the canopy by
removing the three screws on the canopy with the Allen
wrench provided.
MOUNTING
PLATE
CANOPY
Installation Instructions for
Mezzo Grande Pendant
980MEZZOGP
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product can be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Suspension
1.0
LP773_
1A
1
1B
2
SCREW
ALLEN
WRENCH
#8-32 SCREW
Install the mounting plate to the electrical box with the
two provided #8-32 screws.
2 2
MOUNTING
PLATE
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.