ACR Electronics Nauticast Y1-03-0211 - Manual (Page 11)

Y1-03-0211 Rev D 7
Select Submenu 2 “Cargo/Voyage Settings” with cursor button [Up] & [Down] or by pressing
No. 2 on the keyboard.
Toggle the values for the ERI ship type (see Appendix 7.2), the hazardous cargo by the
number of Blue Cones [0-3, B-Flag, Default/Unknown], and the loaded / unloaded status
Un/ Loaded [Loaded, Unloaded].
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. The ERI ship types, which are used in Inland message 10, are automatically
converted to the IMO types which are used in IMO message 5 (refer to Appendix 7.2.).Press
[Back] to return to the Main Menu without saving any changes.
Select Submenu 3 “Persons on Board” with cursor button [Up] & [Down] or by pressing No. 2
on the keyboard.
NOTE: The total number of persons on board will b
e calculated automatically. In “High Seas”
mode this sum will be used for the AIS messages. How to use this menu to transfer PoB –
information will be described in detail in the User Manual.
Select Submenu 4 “Destination” with cursor button [Up] & [Down] by pressing No. 4 on the
keyboard.
Select between mask input and direct input of the destination string.
N48°12' E 16°26' |1> N/A|2> N/A|3> N/Anm
******** Cargo/Voyage Settings *********
ERI ship type :<Vessel, type unknown>
Blue Cones : Default/Unknown
Un/ Loaded : Default/Unknown
----------------------------------------
| Save | | | Exit
N 1 o 18' E 0 o 12' |1>0.01|2>1.30|3>1.80nm
************* PoB Settings *************
Crew Members:0-254 (255 = unknown = default)
Passenger :0-8190(8191= unknown = default)
S. Personal :0-254 (255 = unknown = default)
--------------------------
Total :nnnn Members
M6: Send addressed PoB Message
M7: Broadcast PoB Message
----------------------------------------
Num| Save |Addressed |Broadcast | Exit